TC93 evidence -- RAGFlow Cloud, scoped retrieval (exclusion), C33
dataset: R6-stable-SS-v1 (b09c2f28cbb011f1916c37b82c69031d), slice SS-v1 digest 64131a7b2f68b281
filter attribute: document metadata 'region' set via PUT /datasets/{id}/documents/{doc_id} meta_fields
PART 1 -- REGION METADATA PER DOCUMENT (GET /datasets/{id}/documents)
A01_field_service_policy_and_charges_uk.pdf meta_fields={'region': 'uk'}
A03_calibration_certificate_scan.pdf meta_fields={'region': 'uk'}
A04_employee_handbook.docx meta_fields={'region': 'group'}
A05_depot_and_commissioning_note.md meta_fields={'region': 'uk'}
A06_nordic_service_addendum.docx meta_fields={'region': 'nordic'}
A08_warranty_terms_sales_pack.pdf meta_fields={'region': 'group'}
A09_warranty_statement_service_pack.pdf meta_fields={'region': 'group'}
A10_tolvan_a3_product_overview.md meta_fields={'region': 'group'}
bad_01_truncated.pdf meta_fields={}
bad_02_password_protected.pdf meta_fields={}
summary: {"summary": {"region": {"type": "string", "values": [["group", 4], ["uk", 3], ["nordic", 1]]}}}
PART -- unfiltered baseline
POST /api/v1/retrieval
request: {"question": "Which depot holds the Tolvan A3 loan pool?", "dataset_ids": ["b09c2f28cbb011f1916c37b82c69031d"]}
HTTP 200 code=0 latency=3.95s chunks=12 total=12
=== rank 1 | similarity=0.3487 (vector 0.7280, term 0.1862) | A05_depot_and_commissioning_note.md
# Depot, spares and commissioning - working note
Bristol depot and UK commissioning engineers. Not a contractual document.
## The depot
The Bristol depot sits behind the workshop on the Avonmouth side and is open
07:00 to 17:00, Monday to Friday. Out of hours, the duty engineer holds a key
and may draw stock, recording what was taken on the ticket before leaving the
building.
## Loan stock
The Bristol depot holds the Tolvan A3 loan pool: six calibrated units reserved for Critical cover customers. A loan unit goes out configured for the customer's
deployment, with a current certificate in the case, so that it can be rigged
without a bench check.
Loan units are issued against a signed loan note naming the ticket, the serial
number that went out and the serial number it stands in for. The stores
controller counts loan stock on the first working day of each month.
A customer on Standard or Extended cover may borrow a unit where one is free,
but has no reservation on it: a Critical cover customer takes precedence and the
borrowed unit is recalled with two working days' notice.
## Consumable stock
Anodes, anti-fouling guards and gland kits are held as rolling stock and
reordered at the reorder level marked on the bin. The stores controller reviews
reorder levels each quarter against the previous four quarters of consumption.
## Couriers
The courier cut-off is 15:30 for next-day delivery within the United Kingdom.
Anything handed over after the cut-off travels the following working day.
Dangerous goods - which means any lithium cell over the threshold on the
shipping matrix - need the packing declaration signed by a trained shipper, and
there are two in the building.
## What the depot does not do
The depot does not calibrate. An instrument that needs a certificate goes to the
laboratory, is booked in under its own job number, and comes back to the depot
only once the certificate has been signed.
## Commissioning: before travelling
Confirm the site permit is in place and that the structure is accessible at the
tide state you have planned for. Confirm the instrument's job number and that
the certificate in the case matches the serial number on the housing. Take the
torque wrench; the sensing face is the one part of this job that does not
tolerate improvisation.
## Commissioning: mounting
=== rank 2 | similarity=0.2882 (vector 0.7493, term 0.0905) | A06_nordic_service_addendum.docx
| Item | Held at Bergen | Note |
| Brannoc loan pool | Two units | Issued against a signed loan note |
| Tolvan C5 spares kit | One full kit | Pressure housings, o-ring sets, end caps |
| Consumables | Rolling stock | Anodes, guards, gland kits |
| Deck cable, armoured | 300 m drum | Cut to length on request |
=== rank 3 | similarity=0.2866 (vector 0.6616, term 0.1258) | A01_field_service_policy_and_charges_uk.pdf
Fenwake Instruments Ltd
Field Service Policy and Charges
United Kingdom operations
1.Purpose
This document states what a customer holding a support contract with Fenwake Instruments Ltd may expect when an instrument fails in service, what the service desk in Bristol is obliged to do in response, and what is charged for work that falls outside cover. It applies to the Tolvan A3, the Tolvan C5 and the Brannoc telemetry gateway, on every cover level.
2. Scope
Part A covers fault handling: acknowledgement, attendance, spares and escalation. Part B sets out the charges that apply outside cover. Neither part describes the goods warranty carried by a new instrument
3.Fault priorities
Every ticket is given a priority when it is raised. The priority is set by the effect on the customer's operation, not by which component failed.
· Priority 1 - a deployed instrument is not returning data, or is returning data known to be invalid, and no spare is rigged.
· Priority 2 - an instrument is degraded but usable, or a spare has been rigged and the primary unit is down.
· Priority 3 - a question, a configuration change, or a fault with no operational effect.
A priority may be raised by the duty engineer at any point. It is lowered only with the customer's agreement, recorded on the ticket.
4.Acknowledgement during business hours
Business hours are 08:00 to 18:00, Monday to Friday, excluding statutory non-working days in England and Wales.Within those hours the service desk is staffed continuously and the targets below are measured from the moment the ticket is raised, by telephone or through the portal, whichever is earlier.
An acknowledgement is a named engineer taking ownership of the ticket and telling the customer what happens next. An automatic reply from the ticketing system is not an acknowledgement and does not stop the clock.
4.1 What the target does not cover
The acknowledgement target is not a repair target. Attendance and parts are dealt with in section 5, and the two clocks run independently: a ticket may be acknowledged inside target and still take several days to close.
5.Attendance and parts
Where a fault cannot be cleared remotely, the service desk arranges attendance.Attendance targets are working-day targets and are quoted from the point at which the customer confirms site access.
5.1Consumables
Anti-fouling guards, sacrificial anodes and cable glands are consumables. They are replaced during any attendance and charged at the rates in Part B.
=== rank 4 | similarity=0.2789 (vector 0.7418, term 0.0805) | A06_nordic_service_addendum.docx
Nordic Service AddendumFenwake Instruments Ltd - Norway, Sweden and Denmark1. What this addendum coversThis addendum sets out how service work is delivered for customers in Norway, Sweden and Denmark. It covers logistics, customs, mobilisation, the regional depot and how loan stock is requested. It does not restate commercial terms, and it does not describe the goods warranty carried by a new instrument.2. Regional depotThe regional depot is at Bergen, on the Damsgard side of the harbour, and is open 07:00 to 16:00 local time, Monday to Friday. It is staffed by two engineers and a stores controller.2.1 What the depot holdsLoan pool stock is counted on the first working day of each month and the count is sent to the service desk lead the same day. A discrepancy is investigated before the next issue.3. Requesting a loan unit3.1 Who to callLoan requests from customers in the region are met from the Bergen depot. Ring the depot rather than raising a stores request in the system: the stores queue is worked from the workshop and adds a day to anything that could have been handed over the counter.3.2 What can be lentThe Bergen loan pool covers the Brannoc telemetry gateway. A gateway goes out with its own SIM and a configuration file matching the customer's deployment. Where a customer needs an instrument the depot does not hold as loan stock, the depot raises a request against central stores and tells the customer the same day what can and cannot be met locally. Do not promise a loan unit before the depot has confirmed one is free.3.3 The loan noteEvery loan is recorded on a signed loan note carrying the ticket number, the serial number issued and the date it is due back. Ten working days is the standard loan period, counted from the day the customer's own instrument is returned to service. An overdue loan is chased by the stores controller at ten and at twenty working days, and after that by the service desk lead.3.4 Condition on returnA returned loan unit is inspected, cleaned and re-certified before it goes back into the pool. A unit returned with a broken calibration seal is treated as damaged, quoted for repair, and does not go back into the pool until the laboratory has passed it.4. Customs and exportInstruments moving between the workshop and a Norwegian site travel under a temporary admission carnet. The carnet number goes on the ticket before the instrument leaves the building; an instrument that travels without one is held at the border and the ticket clock is suspended until it is released.
=== rank 5 | similarity=0.2783 (vector 0.6811, term 0.1057) | A09_warranty_statement_service_pack.pdf
Fenwake Instruments Ltd
Warranty Terms
Service pack - warranty terms for the service desk
1. What is covered
These are the warranty terms the service desk applies when a customer reports a failure. They apply to every new Tolvan A3 supplied by Fenwake Instruments Ltd, however it was ordered and wherever it is deployed.
The warranty covers the instrument, its pressure housing, its connector and any cable supplied with it. It covers failure arising from a defect in materials or workmanship. Where a covered failure occurs, Fenwake repairs or exchanges the instrument at its own option and bears the cost of carriage in both directions.
2. The warranty period
Every new Tolvan A3 carries a warranty of 36 months from the date the instrument is delivered. The period runs from delivery rather than from commissioning, and is not extended by a repair carried out under it.
2.1 Instrumentsrepaired underwarranty
A repaired instrument carries the unexpired balance of the original period, or ninety days from the return of the repaired instrument, whichever ends later.
3. What is not covered
· Fouling, corrosion of sacrificial components, and wear of consumables such as anodes, guards and gland kits.
· Damage caused by a mooring failure, a vessel strike, a snagged cable or any other mechanical event outside the instrument.
· Damage caused by opening the housing outside a Fenwake workshop, or by breaking a calibration seal.
· Drift within the published specification. Drift is a calibration matter, not a defect.
· Any instrument whose serial number has been removed or altered.
4. Making a claim
A claim is made through the service desk,quoting the serial number and the delivery note.The service desk raises a ticket, arranges return carriage and tells the customer within five working days whether the failure is covered. Where it is not covered, the customer is quoted for the repair before any work starts.
4.1 If the customer disagrees
Where a customer disputes a decision that a failure is not covered, the instrument is held unrepaired and the head of service operations reviews the file. The instrument is not returned, scrapped or repaired while a
review is open.
5. Limits
This warranty is the whole of the remedy for a defective instrument. Fenwake is not liable for loss of data.
loss of survey time, vessel standby, or any other consequential loss arising from a failure, whether or not that failure is covered.
6. Statutory rights
=== rank 6 | similarity=0.2774 (vector 0.6781, term 0.1057) | A08_warranty_terms_sales_pack.pdf
Fenwake Instruments Ltd
Warranty Terms
Sales pack - customer-facing warranty terms
1. What is covered
These are the warranty terms that accompany a new instrument. They apply to every new Tolvan A3 supplied by Fenwake Instruments Ltd, however it was ordered and wherever it is deployed.
The warranty covers the instrument, its pressure housing, its connector and any cable supplied with it. It covers failure arising from a defect in materials or workmanship. Where a covered failure occurs, Fenwake repairs or exchanges the instrument at its own option and bears the cost of carriage in both directions.
2. The warranty period
Every new Tolvan A3 carries a warranty of 24 months from the date the instrument is delivered. The period runs from delivery rather than from commissioning, and is not extended by a repair carried out under it.
2.1 Instrumentsrepaired under warranty
A repaired instrument carries the unexpired balance of the original period, or ninety days from the return of the repaired instrument, whichever ends later.
3.Whatisnotcovered
·Fouling, corrosion of sacrificial components, and wear of consumables such as anodes, guards and gland kits.
· Damage caused by a mooring failure, a vessel strike, a snagged cable or any other mechanical event outside the instrument.
· Damage caused by opening the housing outside a Fenwake workshop, or by breaking a calibration seal.
· Drift within the published specification. Drift is a calibration matter, not a defect.
· Any instrument whose serial number has been removed or altered.
4. Making a claim
A claim is made through the service desk, quoting the serial number and the delivery note. The service desk raises a ticket, arranges return carriage and tells the customer within five working days whether the failure is covered. Where it is not covered, the customer is quoted for the repair before any work starts.
4.1 If the customer disagrees
Where a customer disputes a decision that a failure is not covered, the instrument is held unrepaired and the head of service operations reviews the file. The instrument is not returned, scrapped or repaired while a review is open.
5. Limits
This warranty is the whole of the remedy for a defective instrument. Fenwake is not liable for loss of data loss of survey time, vessel standby, or any other consequential loss arising from a failure, whether or not that failure is covered.
6. Statutory rights
Nothing in these terms affects a consumer's statutory rights. The instruments described here are sold for commercial use, and the terms are written on that basis.
=== rank 7 | similarity=0.2739 (vector 0.7131, term 0.0856) | A10_tolvan_a3_product_overview.md
# Tolvan A3 - product overview
The Tolvan A3 is a conductivity and temperature sensor built for
continuous deployment in estuarine and coastal water. It is the instrument most
of our customers meet first, and most of the questions the service desk answers
are about this one.
## What it measures
The instrument reports conductivity, temperature and a derived practical
salinity. Conductivity is measured with an inductive cell, which has no exposed
electrodes to foul or to wear, and temperature with a thermistor mounted in the
same flow path so that the two readings describe the same parcel of water.
Pressure is not measured; where a depth record is needed, the instrument is
paired with a separate pressure sensor on the same mooring.
## Where it is used
Typical deployments are estuary monitoring for a regulator, intake monitoring
for a water treatment works, and baseline surveys ahead of construction in a
harbour. It is rated for continuous immersion to fifty metres. Deeper work uses
the Tolvan C5, which shares the sensing arrangement in a
pressure housing rated considerably deeper.
## How it is powered and read
On a mooring, the instrument runs from an internal battery pack and logs to
internal memory. On a cabled installation it is powered over the same cable
that carries its data, and reports continuously to the Brannoc
telemetry gateway, which forwards to the customer's own system. The two modes
are configured at commissioning and are not switched in the field.
## Fouling and cleaning
In estuarine water the practical limit on deployment is biological fouling
rather than power or memory. An anti-fouling guard and a sacrificial anode are
fitted at commissioning and replaced at each service visit. Customers in warm
or nutrient-rich water are advised to shorten the interval between visits
rather than to clean the sensing face themselves, because the inductive cell is
easily damaged by an abrasive.
## Calibration
Every instrument leaves the laboratory with a signed certificate recording the
as-found and as-left bias at four reference points across the working range.
The recommended recalibration interval for the Tolvan A3 is 22 months from the date of the last certificate. An instrument returned early because of a
suspected drift is checked as found before anything is adjusted, so that the
drift can be quantified rather than merely corrected.
## Firmware
=== rank 8 | similarity=0.2252 (vector 0.6426, term 0.0463) | A03_calibration_certificate_scan.pdf
CALIBRATION CERTIFICATE
Fenwake Instruments Ltd
Certificate C-77413
Calibration laboratoryAvonmouth,Bristol S11
SERIAL NUMBER
INSTRUMENT
FW-A3-40871
Tolvan A3 conductivity-temperature sensor
ORDER REFERENCE
CUSTOMER
SEMP/PO/9134
Severn Estuary Monitoring Partnership
NEXT CALIBRATION DUE
DATE OF CALIBRATION
3January 2028
3March 2026
AMBIENT
PROCEDURE
20.4 C, 61 % RH
FWLCAL-114,isSue
Results
Salinityhanhd ainstrncetandard ou
Summary
As-found bias, mean of four points: -0.037 psu As-left bias,mean of four points:-0.004psu Expanded uncertainty (k = 2): 0.008 psu The instrument was adjusted after the as-found check and passed.
=== rank 9 | similarity=0.2221 (vector 0.6934, term 0.0201) | A06_nordic_service_addendum.docx
4.1 Repairs that cross a borderWhere a repair cannot be completed at Bergen and the instrument must return to the workshop, the depot raises a return note and the customer is told the same day. Return shipping is arranged by the depot, never by the customer, so that the carnet stays valid.5. MobilisationOffshore attendance in the region is mobilised through the customer's own vessel wherever one is available. Where it is not, the depot charters through a local agent. Mobilisation requires offshore survival certification current on the day of sailing, and the depot checks certification before booking.6. LanguageService reports are written in English. On request, the depot provides a Norwegian summary of the findings and the actions taken, prepared by the stores controller and checked by the attending engineer.7. SubcontractorsTwo subcontractors are approved for lifting and diving support in the region: Hordaland Subsea AS and Kattegat Marine Services. Neither is authorised to open an instrument or to break a calibration seal.
=== rank 10 | similarity=0.2133 (vector 0.6171, term 0.0402) | A01_field_service_policy_and_charges_uk.pdf
10.Review
Part A is owned by the head of service operations and reviewed each spring with the regional service leads.
Part B -Charges outside cover
11.How to read this part
The charges below apply to work that falls outside the cover level a customer holds: attendance the contract does not include, work in the exclusions at section 9, and any attendance a customer requests at short notice. Work inside cover is not charged.
A callout is charged once per visit. Where an engineer attends on two consecutive days, the second day is charged at the day rate rather than as a second callout.
12. Callout and attendance charges
All figures in pounds sterling, excluding VAT.
Out-of-hours means any call answered outside 08:00 to 18:00,Monday to Friday,and any call answered ona statutory non-working day. The offshore day rate applies to any work carried out from a vessel, whether or not the vessel is under way.
13. Consumables and parts
Consumables fitted during an attendance are charged at list. Parts drawn from a regional depot carry no handling charge; parts couriered from the central store carry the courier cost at invoice.
14.Travel
Travel inside a fifty-mile radius of the Bristol workshop is included in the callout charge. Beyond that radius, travel is charged per mile at the rate in the customer's contract schedule, and any overnight stay is charged at cost.
15. Quotations
Any work expected to exceed two days is quoted in writing before it starts. A quotation holds for sixty days.
=== rank 11 | similarity=0.2129 (vector 0.6628, term 0.0201) | A01_field_service_policy_and_charges_uk.pdf
| Cover level | Attendance target | Spares held |
| Standard | Five working days | Central store only |
| Extended | Three working days | Central store only |
| Critical | Next working day | Regional depot |
=== rank 12 | similarity=0.2102 (vector 0.5927, term 0.0463) | A10_tolvan_a3_product_overview.md
Firmware is updated during a service visit rather than over the telemetry link,
because an interrupted update on a deployed instrument leaves it unreadable
until it is recovered. A customer who declines a recommended update is asked to
confirm in writing, and the confirmation is attached to the instrument record.
CHECK A05 in results: True | docs returned: ['A01_field_service_policy_and_charges_uk.pdf', 'A03_calibration_certificate_scan.pdf', 'A05_depot_and_commissioning_note.md', 'A06_nordic_service_addendum.docx', 'A08_warranty_terms_sales_pack.pdf', 'A09_warranty_statement_service_pack.pdf', 'A10_tolvan_a3_product_overview.md']
PART -- region = nordic (THE TEST)
POST /api/v1/retrieval
request: {"question": "Which depot holds the Tolvan A3 loan pool?", "dataset_ids": ["b09c2f28cbb011f1916c37b82c69031d"], "metadata_condition": {"logic": "and", "conditions": [{"name": "region", "comparison_operator": "=", "value": "nordic"}]}}
HTTP 200 code=0 latency=2.34s chunks=3 total=3
=== rank 1 | similarity=0.2882 (vector 0.7493, term 0.0905) | A06_nordic_service_addendum.docx
| Item | Held at Bergen | Note |
| Brannoc loan pool | Two units | Issued against a signed loan note |
| Tolvan C5 spares kit | One full kit | Pressure housings, o-ring sets, end caps |
| Consumables | Rolling stock | Anodes, guards, gland kits |
| Deck cable, armoured | 300 m drum | Cut to length on request |
=== rank 2 | similarity=0.2789 (vector 0.7418, term 0.0805) | A06_nordic_service_addendum.docx
Nordic Service AddendumFenwake Instruments Ltd - Norway, Sweden and Denmark1. What this addendum coversThis addendum sets out how service work is delivered for customers in Norway, Sweden and Denmark. It covers logistics, customs, mobilisation, the regional depot and how loan stock is requested. It does not restate commercial terms, and it does not describe the goods warranty carried by a new instrument.2. Regional depotThe regional depot is at Bergen, on the Damsgard side of the harbour, and is open 07:00 to 16:00 local time, Monday to Friday. It is staffed by two engineers and a stores controller.2.1 What the depot holdsLoan pool stock is counted on the first working day of each month and the count is sent to the service desk lead the same day. A discrepancy is investigated before the next issue.3. Requesting a loan unit3.1 Who to callLoan requests from customers in the region are met from the Bergen depot. Ring the depot rather than raising a stores request in the system: the stores queue is worked from the workshop and adds a day to anything that could have been handed over the counter.3.2 What can be lentThe Bergen loan pool covers the Brannoc telemetry gateway. A gateway goes out with its own SIM and a configuration file matching the customer's deployment. Where a customer needs an instrument the depot does not hold as loan stock, the depot raises a request against central stores and tells the customer the same day what can and cannot be met locally. Do not promise a loan unit before the depot has confirmed one is free.3.3 The loan noteEvery loan is recorded on a signed loan note carrying the ticket number, the serial number issued and the date it is due back. Ten working days is the standard loan period, counted from the day the customer's own instrument is returned to service. An overdue loan is chased by the stores controller at ten and at twenty working days, and after that by the service desk lead.3.4 Condition on returnA returned loan unit is inspected, cleaned and re-certified before it goes back into the pool. A unit returned with a broken calibration seal is treated as damaged, quoted for repair, and does not go back into the pool until the laboratory has passed it.4. Customs and exportInstruments moving between the workshop and a Norwegian site travel under a temporary admission carnet. The carnet number goes on the ticket before the instrument leaves the building; an instrument that travels without one is held at the border and the ticket clock is suspended until it is released.
=== rank 3 | similarity=0.2221 (vector 0.6934, term 0.0201) | A06_nordic_service_addendum.docx
4.1 Repairs that cross a borderWhere a repair cannot be completed at Bergen and the instrument must return to the workshop, the depot raises a return note and the customer is told the same day. Return shipping is arranged by the depot, never by the customer, so that the carnet stays valid.5. MobilisationOffshore attendance in the region is mobilised through the customer's own vessel wherever one is available. Where it is not, the depot charters through a local agent. Mobilisation requires offshore survival certification current on the day of sailing, and the depot checks certification before booking.6. LanguageService reports are written in English. On request, the depot provides a Norwegian summary of the findings and the actions taken, prepared by the stores controller and checked by the attending engineer.7. SubcontractorsTwo subcontractors are approved for lifting and diving support in the region: Hordaland Subsea AS and Kattegat Marine Services. Neither is authorised to open an instrument or to break a calibration seal.
CHECK A05 in results: False | docs returned: ['A06_nordic_service_addendum.docx']
PART -- region = uk (control)
POST /api/v1/retrieval
request: {"question": "Which depot holds the Tolvan A3 loan pool?", "dataset_ids": ["b09c2f28cbb011f1916c37b82c69031d"], "metadata_condition": {"logic": "and", "conditions": [{"name": "region", "comparison_operator": "=", "value": "uk"}]}}
HTTP 200 code=0 latency=2.10s chunks=5 total=5
=== rank 1 | similarity=0.3487 (vector 0.7280, term 0.1862) | A05_depot_and_commissioning_note.md
# Depot, spares and commissioning - working note
Bristol depot and UK commissioning engineers. Not a contractual document.
## The depot
The Bristol depot sits behind the workshop on the Avonmouth side and is open
07:00 to 17:00, Monday to Friday. Out of hours, the duty engineer holds a key
and may draw stock, recording what was taken on the ticket before leaving the
building.
## Loan stock
The Bristol depot holds the Tolvan A3 loan pool: six calibrated units reserved for Critical cover customers. A loan unit goes out configured for the customer's
deployment, with a current certificate in the case, so that it can be rigged
without a bench check.
Loan units are issued against a signed loan note naming the ticket, the serial
number that went out and the serial number it stands in for. The stores
controller counts loan stock on the first working day of each month.
A customer on Standard or Extended cover may borrow a unit where one is free,
but has no reservation on it: a Critical cover customer takes precedence and the
borrowed unit is recalled with two working days' notice.
## Consumable stock
Anodes, anti-fouling guards and gland kits are held as rolling stock and
reordered at the reorder level marked on the bin. The stores controller reviews
reorder levels each quarter against the previous four quarters of consumption.
## Couriers
The courier cut-off is 15:30 for next-day delivery within the United Kingdom.
Anything handed over after the cut-off travels the following working day.
Dangerous goods - which means any lithium cell over the threshold on the
shipping matrix - need the packing declaration signed by a trained shipper, and
there are two in the building.
## What the depot does not do
The depot does not calibrate. An instrument that needs a certificate goes to the
laboratory, is booked in under its own job number, and comes back to the depot
only once the certificate has been signed.
## Commissioning: before travelling
Confirm the site permit is in place and that the structure is accessible at the
tide state you have planned for. Confirm the instrument's job number and that
the certificate in the case matches the serial number on the housing. Take the
torque wrench; the sensing face is the one part of this job that does not
tolerate improvisation.
## Commissioning: mounting
=== rank 2 | similarity=0.2866 (vector 0.6616, term 0.1258) | A01_field_service_policy_and_charges_uk.pdf
Fenwake Instruments Ltd
Field Service Policy and Charges
United Kingdom operations
1.Purpose
This document states what a customer holding a support contract with Fenwake Instruments Ltd may expect when an instrument fails in service, what the service desk in Bristol is obliged to do in response, and what is charged for work that falls outside cover. It applies to the Tolvan A3, the Tolvan C5 and the Brannoc telemetry gateway, on every cover level.
2. Scope
Part A covers fault handling: acknowledgement, attendance, spares and escalation. Part B sets out the charges that apply outside cover. Neither part describes the goods warranty carried by a new instrument
3.Fault priorities
Every ticket is given a priority when it is raised. The priority is set by the effect on the customer's operation, not by which component failed.
· Priority 1 - a deployed instrument is not returning data, or is returning data known to be invalid, and no spare is rigged.
· Priority 2 - an instrument is degraded but usable, or a spare has been rigged and the primary unit is down.
· Priority 3 - a question, a configuration change, or a fault with no operational effect.
A priority may be raised by the duty engineer at any point. It is lowered only with the customer's agreement, recorded on the ticket.
4.Acknowledgement during business hours
Business hours are 08:00 to 18:00, Monday to Friday, excluding statutory non-working days in England and Wales.Within those hours the service desk is staffed continuously and the targets below are measured from the moment the ticket is raised, by telephone or through the portal, whichever is earlier.
An acknowledgement is a named engineer taking ownership of the ticket and telling the customer what happens next. An automatic reply from the ticketing system is not an acknowledgement and does not stop the clock.
4.1 What the target does not cover
The acknowledgement target is not a repair target. Attendance and parts are dealt with in section 5, and the two clocks run independently: a ticket may be acknowledged inside target and still take several days to close.
5.Attendance and parts
Where a fault cannot be cleared remotely, the service desk arranges attendance.Attendance targets are working-day targets and are quoted from the point at which the customer confirms site access.
5.1Consumables
Anti-fouling guards, sacrificial anodes and cable glands are consumables. They are replaced during any attendance and charged at the rates in Part B.
=== rank 3 | similarity=0.2252 (vector 0.6426, term 0.0463) | A03_calibration_certificate_scan.pdf
CALIBRATION CERTIFICATE
Fenwake Instruments Ltd
Certificate C-77413
Calibration laboratoryAvonmouth,Bristol S11
SERIAL NUMBER
INSTRUMENT
FW-A3-40871
Tolvan A3 conductivity-temperature sensor
ORDER REFERENCE
CUSTOMER
SEMP/PO/9134
Severn Estuary Monitoring Partnership
NEXT CALIBRATION DUE
DATE OF CALIBRATION
3January 2028
3March 2026
AMBIENT
PROCEDURE
20.4 C, 61 % RH
FWLCAL-114,isSue
Results
Salinityhanhd ainstrncetandard ou
Summary
As-found bias, mean of four points: -0.037 psu As-left bias,mean of four points:-0.004psu Expanded uncertainty (k = 2): 0.008 psu The instrument was adjusted after the as-found check and passed.
=== rank 4 | similarity=0.2133 (vector 0.6171, term 0.0402) | A01_field_service_policy_and_charges_uk.pdf
10.Review
Part A is owned by the head of service operations and reviewed each spring with the regional service leads.
Part B -Charges outside cover
11.How to read this part
The charges below apply to work that falls outside the cover level a customer holds: attendance the contract does not include, work in the exclusions at section 9, and any attendance a customer requests at short notice. Work inside cover is not charged.
A callout is charged once per visit. Where an engineer attends on two consecutive days, the second day is charged at the day rate rather than as a second callout.
12. Callout and attendance charges
All figures in pounds sterling, excluding VAT.
Out-of-hours means any call answered outside 08:00 to 18:00,Monday to Friday,and any call answered ona statutory non-working day. The offshore day rate applies to any work carried out from a vessel, whether or not the vessel is under way.
13. Consumables and parts
Consumables fitted during an attendance are charged at list. Parts drawn from a regional depot carry no handling charge; parts couriered from the central store carry the courier cost at invoice.
14.Travel
Travel inside a fifty-mile radius of the Bristol workshop is included in the callout charge. Beyond that radius, travel is charged per mile at the rate in the customer's contract schedule, and any overnight stay is charged at cost.
15. Quotations
Any work expected to exceed two days is quoted in writing before it starts. A quotation holds for sixty days.
=== rank 5 | similarity=0.2129 (vector 0.6628, term 0.0201) | A01_field_service_policy_and_charges_uk.pdf
| Cover level | Attendance target | Spares held |
| Standard | Five working days | Central store only |
| Extended | Three working days | Central store only |
| Critical | Next working day | Regional depot |
CHECK A05 in results: True | docs returned: ['A01_field_service_policy_and_charges_uk.pdf', 'A03_calibration_certificate_scan.pdf', 'A05_depot_and_commissioning_note.md']
CHECK nordic chunks mentioning 'Bristol': 0 of 3
CHECK nordic chunks mentioning 'loan pool': 2 of 3
CHECK nordic chunks mentioning 'depot': 2 of 3